名前: 角藤 日時: 2002-06-16 13:31:17 IPアドレス: 203.165.2.*
>>8937 >>mktexpkでgsftopkが呼ばれpkフォントの生成がスタートします． >>なぜかmathb10とmatha7がghostscriptのエラーで作成されません．どこに問題があるん >>でしょうか？ >mathabx の場合に gsftopk が呼ばれるところがおかしいと思います。 >METAFONT ---> gftopk が正常だと思います。 mktexpk スクリプトを読んでいると、古いやつは METAFONT 以外の 場合からトライするようになっているものもありました。 以下は、最も新しい mktexpk で、まず METAFONT から始めるように なっています。バージョン的に動作するかどうかわかりませんから、 オリジナルをセーブしておいて、テストしてみて下さい: ----- ------ ------- #!/bin/sh # original mktexpk -- make a new PK font, because one wasn't found. # # (If you change or delete the word `original' on the previous line, # installation won't write this script over yours.) # # te@informatik.uni-hannover.de, kb@mail.tug.org, and infovore@xs4all.nl. # Public domain. version='$Id: mktexpk,v 1.25 1999/05/29 20:38:21 olaf Exp $' progname=`echo $0 | sed 's%.*/%%'` usage="Usage: $progname [OPTIONS] NAME [REDIRECT], Create a PK font. --dpi DPI use resolution DPI. --bdpi BDPI use base resolution BDPI. --mag MAG use magnificiation MAG. --mfmode MODE use MODE as the METAFONT mode. --destdir DESTDIR write fonts in DESTDIR. Try to create a PK file for NAME at resolution DPI, with an assumed device base resolution of BDPI, and a Metafont \`mag' of MAG. Use MODE for the METAFONT mode. Use DESTDIR for the root of where to install into, either the absolute directory name to use (if it starts with a /) or relative to the default DESTDIR (if not). REDIRECT, if supplied, is a string of the form '>&n', where n is the number of the file descriptor which is to receive, instead of stdout, the name of the newly created pk file." # Handle non-positional options, except for --version/--help while test $# -gt 0; do case "$1" in --destdir) shift; DEST="$1"; shift ;; --destdir=*) DEST=`echo "$1" | sed 's/--destdir=//'`; shift ;; --dpi) shift; DPI="$1"; shift ;; --dpi=*) DPI=`echo "$1" | sed 's/--dpi=//'`; shift ;; --bdpi) shift; BDPI="$1"; shift ;; --bdpi=*) BDPI=`echo "$1" | sed 's/--bdpi=//'`; shift ;; --mfmode) shift; test "x$1" != "x/" && MODE="$1"; shift ;; --mfmode=*) test "x$1" != "x--mfmode/" \ && MODE=`echo "$1" | sed 's/--mfmode=//'`; shift ;; --mag) shift; MAG="$1"; shift;; --mag=*) MAG=`echo "$1" | sed '/s--mag=//'`; shift;; --version|-version) break ;; --help|-help) break ;; *) break ;; esac done if test "x$2" != x; then tail="`echo \"x$2\" | sed 's/^x>&//' | grep '^[0-9]*$'`" if test -z "$tail"; then echo "$progname: argument '$2' ignored - bad file number" >&2 elif test "$tail" != 1; then eval 'exec 1>&$tail' fi fi mt_max_args=2 # Common code for all scripts. : ${MT_TEXMFMAIN=`kpsewhich --expand-path='$TEXMFMAIN'`} : ${MT_MKTEX_OPT=`kpsewhich --format='web2c files' mktex.opt`} test -n "$MT_MKTEX_OPT" || MT_MKTEX_OPT="$MT_TEXMFMAIN/web2c/mktex.opt" if test ! -f "$MT_MKTEX_OPT"; then echo "$progname: Cannot find mktex.opt; check your installation." >&2 exit 1 fi . "$MT_MKTEX_OPT" # Where do potential driver files belong? case "$MT_FEATURES" in *nomfdrivers*) : ${MT_MFDESTDIR=`pwd`} export MT_MFDESTDIR;; esac # Since we want to pass the generated filename and only that filename # back to the caller on standard output, we do some redirections so # regular echo's will end up on stderr, and do an echo >$STDOUT at the end. # Then the contents of $STDOUT will be echoed to stdout by a trap. # start of redirection stdout -> stderr, stdin <- /dev/null ( NAME=$1 if kpsewhich $NAME.mf >/dev/null 2>&1 || mktexmf $NAME >/dev/null 2>&1; then # determine the progname of metafont to use; prefer mf-nowin. if mf-nowin --version >/dev/null 2>&1; then MF="mf-nowin -progname=mf" else MF=mf fi # Check that $BDPI and $MODE are consistent; if not, ignore the mode and # hope we can correctly guess it from bdpi. (People like to specify the # resolution on the command line, not the mode so much.) if test -n "$MODE"; then mf_bdpi=`$MF \ '\mode:='$MODE';mode_setup;message"BDPI= "&decimal round pixels_per_inch;end.'\ </dev/null \ | awk '/DPI=/ {print $2}'` if test "x$mf_bdpi" != x$BDPI; then echo "$progname: Mismatched mode $MODE and resolution $BDPI; ignoring mode." >&2 MODE= fi fi # If an explicit mode is not supplied, try to guess. You can get a # list of extant modes from ftp://ftp.tug.org/tex/modes.mf. if test -z "$MODE" || test "x$MODE" = xdefault; then case "$BDPI" in 85) MODE=sun;; 100) MODE=nextscrn;; 180) MODE=toshiba;; 300) MODE=cx;; 400) MODE=nexthi;; 600) MODE=ljfour;; 1270) MODE=linoone;; *) echo "$progname: Can't guess mode for $BDPI dpi devices." >&2 echo "$progname: Use a config file, or update me." >&2 exit 1 esac fi # Run Metafont. Always use plain Metafont, since reading cmbase.mf # does not noticeably slow things down. cmd="$MF \mode:=$MODE; mag:=$MAG; nonstopmode; input $NAME" else MODE=modeless # ps_to_pk is set in mktex.opt case $ps_to_pk in gsftopk) if $ps_to_pk -t "$NAME"; then cmd="$ps_to_pk $NAME $DPI" fi;; ps2pk) # grep for the font in $PSMAPFILE. These are base font names, such as # rpplr (the original) or pplr0 (an interim step) or pplr8r (current). : ${PSMAPFILE=`kpsewhich --format='dvips config' psfonts.map ps2pk.map`} pattern="^$NAME"'([ ]|$)' psline=`egrep "$pattern" $PSMAPFILE | tail -1` if test -n "$psline"; then set x `echo "$psline" | sed 's%[<["]%%g'` shift; shift; shift; encoding=; psname=; slant=; extend= while test ! -z "$1"; do case "$1" in *.enc) encoding="-e $1";; *.pf[ab]) psname="$1";; *SlantFont) slant="-S $lastopt";; *ExtendFont) extend="-E $lastopt";; esac lastopt="$1" shift done # Guessing the name of the type1 font file as fallback: ANAME=`echo $NAME | sed 's/8r$/8a/'` for i in $NAME.pfa $NAME.pfb $ANAME.pfa $ANAME.pfb; do if kpsewhich $i >/dev/null 2>&1; then psname=$i break fi done if [ -n "$psname" ]; then cmd="ps2pk -v -X$DPI -R$BDPI $slant $extend $encoding $psname $NAME.${DPI}pk" else if gsftopk -t "$NAME"; then echo "$progname: cannot find $NAME.pfa or $NAME.pfb. Trying gsftopk." >&2 cmd="gsftopk $NAME $DPI" fi fi fi;; esac # unsupported by $ps_to_pk, try other conversions: if test -z "$cmd"; then if (ttf2pk -t -q $NAME) >/dev/null 2>&1; then cmd="ttf2pk -q $NAME $DPI" elif (hbf2gf -t -q $NAME) >/dev/null 2>&1; then cmd="hbf2gf -q -p $NAME $DPI" else echo "$progname: don't know how to create bitmap font for $NAME." >&2 exit 1 fi fi fi OIFS=$IFS; IFS=$SEP set x `"$MT_MKTEXNAM" $NAME $DPI $MODE $DEST`; shift IFS=$OIFS PKDEST="$1" PKDESTDIR=`echo "$PKDEST" | sed 's%/[^/][^/]*$%%'` # can't rely on dirname PKNAME=`basename "$PKDEST"` GFNAME=$NAME.${DPI}gf if test -r "$PKDESTDIR/$PKNAME"; then echo "$progname: $PKDESTDIR/$PKNAME already exists." >&2 echo "$PKDESTDIR/$PKNAME" >$STDOUT "$MT_MKTEXUPD" "$PKDESTDIR" $PKNAME exit 0 fi "$MT_MKTEXDIR" "$PKDESTDIR" if test ! -d "$PKDESTDIR"; then echo "$progname: mktexdir $PKDESTDIR failed." >&2 exit 1 fi echo "$progname: Running $cmd" $cmd </dev/null || { # Don't abort if only "Strange path" or "bad pos" errors occurr. grep '^!' $NAME.log | sort >$$.errs 2>/dev/null grep '^! Strange path' $$.errs >$$.strange 2>/dev/null grep '^! bad pos.' $$.errs >$$.badpos 2>/dev/null cat $$.badpos $$.strange | sort > $$.errs_accept if cmp $$.errs $$.errs_accept >/dev/null 2>&1; then test -s $$.strange >/dev/null 2>&1 \ && echo "$progname: warning: \`$cmd' caused strange path errors." >&2 test -s $$.badpos >/dev/null 2>&1 \ && echo "$progname: warning: \`$cmd' caused bad pos errors." >&2 else echo "$progname: \`$cmd' failed." >&2 test -s $NAME.log && mv -f $NAME.log "$KPSE_DOT" exit 1; fi } test -r $GFNAME && { gftopk ./$GFNAME $PKNAME || exit 1; } test ! -f $PKNAME && test -f $NAME.${DPI}pk && mv $NAME.${DPI}pk $PKNAME if test ! -s $PKNAME; then echo "$progname: \`$cmd' failed to make $PKNAME." >&2 exit 1 fi # Install the PK file carefully, since others may be working simultaneously. # Use cp when mv fails, since DOS will fail mv for deeply-nested directories. mv $PKNAME "$PKDESTDIR/pk$$.tmp" 2>/dev/null \ || cp $PKNAME "$PKDESTDIR/pk$$.tmp" || exit 1 cd $PKDESTDIR || exit 1 chmod `kpsestat -xst,go-w .` pk$$.tmp test -r $PKNAME || mv pk$$.tmp $PKNAME || exit 1 # Update ls-R if necessary. "$MT_MKTEXUPD" "$PKDESTDIR" $PKNAME # If this line (or an equivalent) is not present, dvipsk/xdvik/dviljk # will think mktexpk failed. Any other output to stdout will also lose. echo "$PKDESTDIR/$PKNAME" >$STDOUT echo "$progname: $PKDESTDIR/$PKNAME: successfully generated." >&2 ) 1>&2 </dev/null
この書き込みへの返事：